Mon, May 20, 2019
4:26 AM
Feedback
Kaushalya Karnataka

ಕೌಶಲ್ಯಾಭಿವೃದ್ಧಿ, ಉದ್ಯಮಶೀಲತೆ ಮತ್ತು ಜೀವನೋಪಾಯ ಇಲಾಖೆ

Department of Skill Development and Entrepreneurship and Livelihood

Karnataka Government Logo

Featured Article

Carpenter – Wooden Furniture – Curriculum/Syllabus

Author:megha|April 25th, 2019

This course encompasses 5 out of 5 National Occupational Standards (NOS) of “Carpenter – Wooden                  Furniture” Qualification Pack issued by “SSC: Furniture & Fittings Skill Council”.

 

Sr.
No.
Module Key Learning Outcomes Equipment Required
1 Introduction

 

 

Theory Duration
(hh:mm)
08:00

Practical Duration
(hh:mm)
00:00

Corresponding NOS Code
Bridge Module

• Impart General Discipline in the class
room
• The Role of a Carpenter – Wooden
Furniture and job opportunities and its
importance
• Scope of furniture & fittings industry
• To impart Basic skills of communication
• To Provide Basic reading capabilities to
enable him to read signs, notices and/or
cautions at site.
1XBlackboard,
Chalk 2 packet, duster 1 pc.
2 Understanding the
organizational context/
company/ employer

 

Theory Duration
(hh:mm)
08:00

Practical Duration
(hh:mm)
00:00

Corresponding NOS Code
FFS/N0102

• Expectations and responsibilities of the
job role
• Gain Knowledge and understand the
importance of the rules, codes, guidance
and standards, policies, manuals, rules
and regulation of the organization
• Contacting the concerned persons in
case of queries on procedures/
products/ any problem
• He will learn the escalation in hierarchy
3 Tools, equipment and
work areas

 

Theory Duration
(hh:mm)
12:00

Practical Duration
(hh:mm)
24:00

Corresponding NOS Code
FFS/N8501

Identify, maintain and handle the
required tools, equipment and
consumable safely and correctly
• Maintenance of appropriate
environment to protect stock from
pilfering, theft, damage and
deterioration
• Dispose waste safely in the designated
location
• Storing cleaning equipment safely after
use
• Maintain Storage of records and
maintain documents.
• Different ways of minimizing wastes
• Analysis, evaluate and application of the
information gathered from observation,
experience, reasoning or
communication to act efficiently
Measurement
Tools,
Planing Tools, Sawing
Tools,
Testing Tools,
Chipping Tools,
Holding Tools,
Boring Tools,
Filling Tools,
Supportive Tools,
4 Environmental Health,
Safety and Security at
Work Place

 

Theory Duration
(hh:mm)
08:00

Practical Duration
(hh:mm)
00:00

Corresponding NOS Code
FFS/N8601

• Follow General safety Rules, common
hazards in the work area and procedures
for dealing with the same.
• Training to Introduction of Personal
protective equipment like safety
harness, helmet, gloves, goggles,earplugs, nose mask, shoes etc. and their
application under different working
conditions.
• Introduction to various safety
procedures and methods like
barricading of work place, signage,
safety drills, evacuation Procedures etc.
• Reporting procedure for violation of
safety.
• Introduction to waste management and
pollution control.
• Understand various health hazards
relevant to workplace and basic first aid
training.
• Identify and selection of right
equipment such as fire extinguisher &
based on type of fire.
• Following agreed work location
procedures in the event of an
emergency and of any injury
Helmet, earplugs, goggles,
nose mask,
First aid, Fire
Extinguisher
Usage Etc.
5 Preparation of the wood
for making the Wooden
Furniture

 

Theory Duration
(hh:mm)
40:00

Practical Duration
(hh:mm)
48:00

Corresponding NOS Code
FFS/N0102

• Understand and identify the different
types and basic properties of timber,
plywood, metals etc.
• Prepare to Select materials and types of
timber and determining the quantity of
the material as per the customer
requirement
• Collection of technical drawings, or
instructions
• He will understand the Preparation of
sketches/ drawings as per the
requirement
• Estimation and measurement of length,
width & depth in MKS & FPS system and
its application
• Organizing, preparing the tools and
equipment as per the requirement
• Identify power sockets for different
electrical equipment
• Checking the functioning and test
running the electrical equipment before
starting the actual work
• Reporting to supervisor in case of unsafe
electrical equipment and power socket
Wood, Ply,
Laminate, Veneers,
Edge Banding,
Adhesives,
Usage of Tool
6 Cutting, trimming and
inspection of the wood

 

Theory Duration
(hh:mm)
16:00

Practical Duration
(hh:mm)                                          52:00

Corresponding NOS Code
FFS/N0102

• Knowledge to understand
measurements as per the technical
drawings or instruction of the supervisor
• Marking the woods/ equipment
appropriately on the woods to be cut as
per the measurement
• Knowledge of Placing the cutting tools
or equipment before starting the actual
work• knowledge for Cutting the wood using
appropriate tools and equipment as per
the specified measurements
• Preparing the wood based boards and
laminating sheets as per the
requirement of the size and shape
• Preparing components to facilitate
joining and fixing
• Removing excess wood by trimming the
cut wood in case the wood is not cut as
per the measurement
• Preparing templates, jigs and fixtures for
furniture using material such as wood,
plywood, fiberglass or drywall
• Ensuring cutting components are
arranged for the next stage of
production
• Conducting a visual check for any errors
or damages to the cut components
• Verifying the cut components are in line
with the technical drawings and designs
specifications
• He will be able to Rectify the errors
within one’s own responsibility and as
per instruction of the supervisors
Tools usage
For cutting of
Wood, ply,
Adhesive for
Pasting laminates etc.
7 Assembling the different
parts of the furniture

 

Theory Duration
(hh:mm)
36:00

Practical Duration
(hh:mm)
48:00

Corresponding NOS Code
FFS/N0103

Understand the Estimation of the
height, width, length and other
proportions for preparation of the lay
out
• Identify different components, their
respective positions as per the
requirement
• Preparation of equipment and tools
• Alignment and positioning the
components according to the drawing
and as required for the joining
• Assembly of the components ensuring
correct fit and as per instructions of the
supervisors
• Understand the process of carrying out
operations using the appropriate tools
and equipment
• Application of appropriate amount of
adhesive as per the material and
requirement
• Checking of overall accuracy in terms of
measurements and standard work
practices
• Checking of quality of the product in
terms of rigidity, steadiness, angular
accuracy and neatness
• Application of hard putty on the furniture
• Cleaning the furniture in case of dust
accumulation
• Checking for any misfits in the
assembled parts/ scratches/ defects in
furniture
• Verification of furniture is in line with the
blue print and design specification
• Rectifying the errors within one’s own
responsibility and as per the instruction
• Checking alignments and snagging in
assembled parts and furniture
• Conducting performance test of the
finished product as per the supervisor’s
instructions
Tools usage
For cutting of
Wood, ply,
Adhesive for
Pasting laminates, Testing
tools etc.
8 Carrying out work
effectively at the
workplace

 

 

Theory Duration
(hh:mm)
08:00

Practical Duration
(hh:mm)
00:00

Corresponding NOS Code
Bridge Module

Understand Working effectively with
others whenever required
• Keep work area neat and clean in
organized state
• Finishing all the allocated tasks within
the required time frame and adhering to
the standards
• Behaving in a courteous manner with
colleagues, customers
• Asking for clarification, seeking help
from the right authority at the work
place
• Following dress code of the work
location
• Adhering to the norms, policies,
procedures of the organization
• Seeking clarification, identifying and
reporting to the right authority as and
when required
1XBlackboard,
Chalk 2 packet, duster 1 pc.
Total Duration

 

Theory Duration
136:00

Practical Duration
172:00

Unique Equipment Required:
1XBlackboard, Chalk 2 Packet, Duster 1 pc, gloves, earplugs, goggles, nose
mask, Measurement Tools, Planning Tools, Sawing Tools, Testing Tools, Chipping Tools, Holding Tools, Boring Tools, Filling Tools, Supportive Tools

 

 

Grand Total Course Duration: 308.00 Hours
(This syllabus/ curriculum has been approved by SSC: Furniture & Fittings Skill Council)

 

 

Next                  Previous

Social Media News

Latest Articles

no-image

Belgaum – Top 10 skill aspirations

Belgaum - Top 10 skill aspirations

May 18th, 2019
no-image

Dharwad – Top 10 Skill aspirations

Dharwad - Top 10 Skill aspirations

May 18th, 2019

Events

Events

Categories

  • Jobs
  • Guidelines
  • Government Orders
  • Resource
  • Tender/ EOI
  • Sector and Job Roles
  • Accredited Centers
  • Job Mela
  • GTTC
  • CEDOK
  • District Skill Office
  • QP - NOS & Curriculum
  • Kaushal Ads
  • FAQ