Tue, Jun 18, 2019
8:37 PM
Feedback
Kaushalya Karnataka

ಕೌಶಲ್ಯಾಭಿವೃದ್ಧಿ, ಉದ್ಯಮಶೀಲತೆ ಮತ್ತು ಜೀವನೋಪಾಯ ಇಲಾಖೆ

Department of Skill Development and Entrepreneurship and Livelihood

Karnataka Government Logo

Featured Article

Pre- Assembly Operator- Assessment Criteria

Author:Asha|June 12th, 2019

 Annexure: Assessment Criteria

Assessment Criteria for Pre-Assembly Operator (Footwear)
Job Role Pre-Assembly Operator (Footwear)
Qualification Pack LSS/Q2601, V1.0
Sector Skill Council Leather

 

Sr.No. Guidelines for Assessment
1 Criteria for assessment for each qualification pack will be created by the sector skill council. Each performance Criteria (PC) will be assigned marks proportional to its importance in NOS. SSC will also lay down proportion of marks for Theory and Skills Practical for each PC
2 The assessment for the theory part will be based on the knowledge bank of questions created by the SSC.
3 Individual assessment agencies will create unique question papers for theory part for each candidate at each examination/training centre (as per assessment criteria below)
4 Individual assessment agencies will create unique evaluations for skill practical for every student at each examination/training centre based on these criteria.
5 To pass the Qualification Pack, every trainee should score a minimum of 50% aggregate.
6 In case of successfully passing an only a certain number of NOS’s, the trainee is eligible to take a subsequent assessment on the balance NOS’s to pass the Qualification Pack.

 

Assessable Outcome Assessment Criteria Total Marks Marks Allocation
Out of Theory  Skills
Practical
1. LSS/N2601: Carry out splitting operation in upper footwear PC1. Follow the instructions on the work ticket/ job card 50 9 7 2
PC2. Make sure that the work area is free from hazards 2 0 2
PC3. Carry out checks on the materials used to ensure they meet the specification matching
 Within a product
 Between a pair of products where applicable
2 0 2
PC4. Agree and review agreed upon work targets with the supervisor 2 0 2
PC5. Assist in carrying out foundation footwear operations safely and at a rate which maintains work flow and meets production targets 3 0 3
PC6. Report any damaged work to the concerned person responsible 2 0 2
PC7. Ask questions to obtain more information on tasks when the instructions are unclear 2 0 2
PC8. Sort the uppers from the clicking section as per the specifications in the job card 3 0 3
PC9. Count and validate the number of uppers are as per the job card 3 0 3
PC10. Keep the machines and materials ready for splitting 3 0 3
PC11. Place the upper component on the splitting machine for splitting it into the required thickness 11 8 3
PC12. Check the uppers after splitting for the correct thickness 3 0 3
PC13. Sort and place work to assist the next stage of production 2 0 2
PC14.Keep work area clean , safe and secure after use 3 0 3
Total 50 15 35
2. LSS/N2602: Carry out gimping operation PC1. Follow the instructions on the work ticket/ job card 50 3 0 3
PC2. Make sure that the work area is free from hazards 2 0 2
PC3. Carry out checks to ensure that the materials used meet the specification matching
 Within a product
 Between a pair of products where applicable
3 0 3
PC4. Agree and review agreed upon work targets with the supervisor 2 0 2
PC5. Assist in carrying out foundation footwear operations safely and at a rate which maintains work flow and meets production targets 9 7 2
PC6. Report any damaged work to the concerned person responsible 1 0 1
PC7. Ask questions to obtain more information on tasks when the instructions are unclear 1 0 1
PC8. Sort the uppers from the splitting section as per the specifications in the job card 2 0 2
PC9. Count and validate the number of upper components/vamp are as per the job card 3 0 3
PC10. Keep the machines and materials ready for gimping 3 0 3
PC11. Place the upper component/vamp on the gimping machine to get the required shape as per the job card 11 8 3
PC12. Check the uppers after gimping for the correct shape 2 0 2
PC13. Sort and place work to assist the next stage of production 3 0 3
PC14.Keep work area clean, safe and secure after use 5 0 5
Total 50 15 35
3. LSS/N2603: Carry out ironing operation PC1. Follow the instructions on the work ticket/ job card 50 1 0 1
PC2. Make sure that the work area is free from hazards 9 8 1
PC3. Support the operator in checking the materials used meet the specification matching
 within a product
 between a pair of products where applicable
1 0 1
PC4. Agree and review agreed upon work targets with the supervisor 1 0 1
PC5. Assist in carrying out foundation footwear operations safely and at a rate which maintains work flow and meets production targets 8 7 1
PC6. Report any damaged work to the responsible person 1 0 1
PC7. Ask questions to obtain more information on tasks when the instructions are unclear 1 0 1
PC8. Sort the splitted uppers from the splitting/skiving section as per the
specifications in the job card
3 0 3
PC9. Count and validate the number of splitted uppers are as per the job card 5 0 5
PC10. Keep the machines and materials ready for ironing activity 5 0 5
PC11. Place the upper component and the reinforcement material onto the ironing machine for ironing and setting 5 0 5
PC12. Check the uppers after ironing for quality standards 4 0 4
PC13. Sort and place work to assist the next stage of production 5 0 5
PC14.Keep work area clean, safe and secure after use 1 0 1
Total 50 15 35
4. LSS/N2604: Carry out marking activities PC1. Follow the instructions on the work ticket/ job card 50 2 0 2
PC2. Make sure that the work area is free from hazards 3 0 3
PC3. Support the operator in checking the materials used meet the specification matching
 Within a product
 Between a pair of products where applicable
10 8 2
PC4. Agree and review agreed upon work targets with the supervisor 3 0 3
PC5. Assist in carrying out foundation footwear operations safely and at a rate which maintains work flow and meets production targets 3 0 3
PC6. Report any damaged work to the responsible person 3 0 3
PC7. Ask questions to obtain more information on tasks when the instructions are unclear 2 0 2
PC8. Sort the uppers from the designing section as per the specifications in the job card 12 7 5
PC9. Count and validate the number of uppers are as per the job card 3 0 3
PC10. Keep the tools and materials ready for marking 5 0 5
PC11. Mark the upper component as per the designs specified by the designing section 3 0 3
PC12. Check the uppers after splitting for the correct thickness 1 0 1
Total 50 15 35
5. LSS/N2605: Carry out edge colouring activities PC1. Follow the instructions on the work ticket/ job card 50 1 0 1
PC2. Make sure that the work area is free from hazards 2 0 2
PC3. Support the operator in checking the materials used meet the specification matching
 Within a product
 Between a pair of products where applicable
3 0 3
PC4. Agree and review agreed upon work targets with the supervisor 3 0 3
PC5. Assist in carrying out foundation footwear operations safely and at a rate which maintains work flow and meets production targets 3 0 3
PC6. Report any damaged work to the concerned person responsible 10 7 3
PC7. Ask questions to obtain more information on tasks when the instructions are unclear 3 0 3
PC8. Sort the upper from as per the specifications in the job card 2 0 2
PC9. Count and validate the number of uppers are as per the job card 1 0 1
PC10. Keep the tools and materials ready for edge coloring 3 0 3
PC11. Paint the raw edges with brush to match the exact color of the upper components 11 8 3
PC12. Check the edges are uniformly colored and match the specifications as in the job card 3 0 3
PC13. Sort and place work to assist the next stage of production 3 0 3
PC14.Keep work area clean, safe and secure after use 2 0 2
Total 50 15 35
6. LSS/N2606: Carry out pasting activities PC1. Follow the instructions on the work ticket/ job card 50 1 0 1
PC2. Make sure that the work area is free from hazards 1 0 1
PC3. Support the operator in checking the materials used meet the specification matching
 Within a product
 Between a pair of products where applicable
1 0 1
PC4. Agree and review agreed upon work targets with the supervisor 1 0 1
PC5. Assist in carrying out foundation footwear operations safely and at a rate which maintains work flow and meets production targets 9 7 2
PC6. Report any damaged work to the concerned person responsible 2 0 2
PC7. Ask questions to obtain more information on tasks when the instructions are unclear 2 0 2
PC8. Sort the upper components as per the specifications in the job card 2 0 2
PC9. Count and validate the number of upper components are as per the job card 2 0 2
PC10. Keep the tools and materials ready for pasting 1 0 1
PC11. Apply the adhesives onto the skived edges of the upper components and the required joining area 2 0 2
PC12. Leave the pasted components for drying at room temperature 13 8 5
PC13. Check the uppers after drying for any adhesive spillage 5 0 5
PC14. Sort and place work to assist the next stage of production 5 0 5
PC15.Keep work area clean, safe and secure after use 3 0 3
Total 50 15 35
7. LSS/N2607: Carry out hand folding activities PC1. Follow the instructions on the work ticket/ job card 50 3 0 3
PC2. Make sure that the work area is free from hazards 3 0 3
PC3. Support the operator in checking the materials used meet the specification matching
 within a product
 between a pair of products where applicable
3 0 3
PC4. Agree and review agreed upon work targets with the supervisor 10 7 3
PC5. Assist in carrying out foundation footwear operations safely and at a rate which maintains work flow and meets production targets 2 0 2
PC6. Report any damaged work to the concerned person responsible 3 0 3
PC7. Ask questions to obtain more information on tasks when the instructions are unclear 3 0 3
PC8. Anticipate and respond to requests for assistance from colleagues willingly and politely 3 0 3
PC9. Update & develop knowledge of the products, check with others when unsure of new product details 10 8 2
PC10. Sort the pasted uppers are as per the job card 2 0 2
PC11. Fold the upper components to exactly match the basic pattern using the awl and beading hammer 2 0 2
PC12. Check the folded components adhere to quality standards 2 0 2
PC13. Sort and place work to assist the next stage of production 2 0 2
PC14.Keep work area clean, safe and secure after use 2 0 2
Total 50 15 35
8. LSS/N2608: Carry out eyeletting operation PC1. Follow the instructions on the work ticket/ job card 50 1 0 1
PC2. Make sure that the work area is free from hazards 1 0 1
PC3. Support the operator in checking the materials used meet the specification matching
 within a product
 between a pair of products where applicable
3 0 3
PC4. Agree and review agreed upon work targets with the supervisor 1 0 1
PC5. Assist in carrying out foundation footwear operations safely and at a rate which maintains work flow and meets production targets 9 8 1
PC6. Report any damaged work to the responsible person 1 0 1
PC7. Ask questions to obtain more information on tasks when the instructions are unclear 1 0 1
PC8. Sort the stitched uppers are as per the job card specifications 1 0 1
PC9. Place the stitched upper on the eyeletting machine positioned at the exact point mentioned in the job card to do the eyeletting 12 7 5
PC10. Check to see the correct number of eyelets are inserted properly 5 0 5
PC11. Sort and check the adherence to quality standards 5 0 5
PC12. Sort and place work to assist the next stage of production 5 0 5
PC13. Keep the tools and workplace tidy 5 0 5
Total 50 15 35
9. LSS/N2609: Support to achieving product quality in footwear manufacturing PC1. Ensure materials and component parts meet specifications 50 1 0 1
PC2. Ensure the quality of the product meets specification during production 6.5 6 6.5
PC3. Maintain the required productivity and quality levels 0.5 0 0.5
PC4. Carry out quality checks at agreed intervals and in the approved way 7.5 7 0.5
PC5. Count and verify the number of uppers are as per job card at the start and end of every stage in the processes 0.5 0 0.5
PC6. Sort the components as per the job card after each process before passing it to the next stage of production 0.5 0 0.5
PC7. Ensure that the quality and appearance of the uppers are not affected during materials movement 0.5 0 0.5
PC8. Report and replace faulty materials and component parts which do not meet specification with the operator’s approval 1 0 1
PC9. Maintain the continuity of production with minimum interruptions and downtime 9 8 1
PC10. Identify faults and irregularities in equipment and machinery and report to the superior 1 0 1
PC11. Ensure minimum wastage and their proper disposal 8 7 1
PC12. Ensure the components are split as per the thickness specified in the job card 1 0 1
PC13. Ensure the gimped uppers conform to the curves as specified in the job card 1 0 1
PC14. Ensure that the ironing is done properly and there are no pleats/wrinkles 0.5 0 0.5
PC15. Correctly mark the uppers as per the design specified 1 0 1
PC16. Ensure the edge color is done correctly and smoothly and should be matching exactly to the concerned uppers 8 7 1
PC17. Paste the uppers carefully without any spillage/damage 1 0 1
PC18. Ensure the folding is done exactly as per the basic design 1 0 1
PC19. Ensure the eye- letting is done at the proper position as specified in the job card 0.5 0 0.5
Total 50 15 35
10. LSS/N8501: Maintain the  work area, tools and machines PC1. Handle materials, machinery, equipment and tools safely and correctly 50 4 0 4
PC2.Use correct lifting and handling procedures 2 0 2
PC3.Use materials to minimize waste 1 0 1
PC4.Prepare and organize work 2 0 2
PC5. Maintain a clean and hazard free working area 2 0 2
PC6.Deal with work interruptions 8 7 1
PC7.Move around the workplace with care 1 0 1
PC8.Maintain tools and equipment 1 0 1
PC9.Carry out running maintenance within agreed schedules 1 0 1
PC10.Carry out maintenance and/or cleaning outside responsibility 2 0 2
PC11.Report unsafe equipment and other dangerous occurrences 9 8 1
PC12.Ensure that the correct machine guards are in place 1 0 1
PC13.Work in a comfortable position with the correct posture 1 0 1
PC14.Use cleaning equipment and methods appropriate for the work to be carried out 1 0 1
PC15.Dispose of waste safely in the designated location 2 0 2
PC16.Store cleaning equipment safely after use 1 0 1
PC17.Complete and store accurate records and documentation 3 0 3
PC18.Maintain proper lighting, ventilation to make sure general comfort is there while working 2 0 2
PC19.Give inputs and assist in completing documentation 1 0 1
PC20.Report the need for maintenance
and/or cleaning outside your area of responsibility
2 0 2
PC21. Ensure safe and correct handling of materials, equipment and tools 1 0 1
PC22.Maintain appropriate environment to protect stock from pilfering, theft, damage and deterioration 2 0 2
Total 50 15 35
11. LSS/N8601: Maintain health, safety and security at workplace PC1. Comply with health and safety related instructions applicable to the workplace 25 11 10 1
PC2. Use and maintain personal protective equipment as per protocol 1 0 1
PC3. Carry out own activities in line with approved guidelines and procedures 1 0 1
PC4. Maintain a healthy lifestyle and guard against dependency on intoxicants 1 0 1
PC5. Follow environment management system related procedures 1 0 1
PC6. Identify and correct (if possible) malfunctions in machinery and equipment 1 0 1
PC7. Report any service malfunctions that cannot be rectified 1 0 1
PC8. Store materials and equipment in line with manufacturer’s and organisational requirements 0.5 0 0.5
PC9. Safely handle and move waste and debris 1 0 1
PC10. Minimize health and safety risks to self and others due to own actions 0.5 0 0.5
PC11. Seek clarifications, from supervisors or other authorized personnel in case of perceived risks 1 0 1
PC12. Monitor the workplace and work processes for potential risks and threats 0.5 0 0.5
PC13. Carry out periodic walk-through to keep work area free from hazards and obstructions, if assigned 1 0 1
PC14. Report hazards and potential risks/ threats to supervisors or other authorized personnel 0.5 0 0.5
PC15. Participate in mock drills/ evacuation procedures organized at the workplace 0.5 0 0.5
PC16. Undertake first aid, fire-fighting and emergency response training, if asked to do so 1 0 1
PC17. Take action based on instructions in the event of fire, emergencies or accidents 0.5 0 0.5
PC18. Follow organization procedures for shutdown and evacuation when required 1 0 1
Total 25 10 15
12. LSS/N8701: Comply with industry, regulatory and organizational requirements PC1. Carry out work functions in accordance with legislation and regulations, organizational guidelines and procedures 25 13 10 3
PC2. Seek and obtain clarifications on policies and procedures, from your supervisor or other authorized personnel 3 0 3
PC3. Apply and follow these policies and procedures within your work practices 3 0 3
PC4. Provide support to your supervisor and team members in enforcing these considerations 3 0 3
PC5. Identify and report any possible deviation to these requirements 3 0 3
Total 25 10 15
Grand Total 550 550 190 360

 

Previous 

Social Media News

Latest Articles

no-image

KVTSDC – Email ID

KVTSDC - Email ID

June 18th, 2019
no-image

District Skill Officer – Email IDs

District Skill Officer - Email IDs

June 18th, 2019

Events

Events

Categories

  • Jobs
  • Guidelines
  • Government Orders
  • Resource
  • Tender/ EOI
  • Sector and Job Roles
  • Accredited Centers
  • Job Mela
  • GTTC
  • CEDOK
  • District Skill Office
  • QP - NOS & Curriculum
  • Kaushal Ads
  • FAQ